If the same resistor has a tolerance of 1%, its resistance will only vary by 1%. Therefore, a 500Ω resistor can then vary between 495Ω and 505Ω. This is tolerance as an example. A precision resistor is a resistor that has a tolerance level as low as 0.005%. This means a precision resistor will only vary 0.005% from its nominal value.

Mixing operations are either Continuous of Batch type. The preference of batch or continuous mixing is influenced by factors like the quantity of material to be blended, required degree of product homogeneity, pre-mixing and post mixing operations. This article explains the continuous mixing systems and continuous mixers. The applications for which continuous mixing is preferred are ...

Ultra Precision Low TCR Thin Film Resistor, Surface Mount Chip, ± 2 ppm/°C TCR, 0.01 % Tolerance: Resistors, Fixed: 0.15: 0603: 2: 0.01: 100: 130 K

High Precision Resistors: SX Silicone Coated Series.01 to .1 Watt Wire Wound High Precision Axial Resistor.11 to .5 Watt Wire Wound High Precision Axial Resistor.51 and Higher Watt Wire Wound High Precision Axial Resistor; Current Sensing/Shunts. PLV Series 4-Terminal Rect. Axial Shunts; MS-40 Shunt; RTD/Compensators

Power resistor, precision resistor, voltage divider or thermistor are often very individual and customized components. With our "Resistor Engineering" we help to find the specific technologies and the optimum product solution; even for relatively small quantities.

The BAS precision resistor series from Isabellenhütte, designed for battery management systems or welding equipment with a low resistance values from 0.000035Ω to 0.0005Ω. The BAS series from Isabellenhütte is available with tinned or untinned terminals, continuous load up to 350A (100µΩ) within a chip size of 8420.

High Precision Resistors: SX Silicone Coated Series.01 to .1 Watt Wire Wound High Precision Axial Resistor.11 to .5 Watt Wire Wound High Precision Axial Resistor.51 and Higher Watt Wire Wound High Precision Axial Resistor; Current Sensing/Shunts. PLV Series 4-Terminal Rect. Axial Shunts; MS-40 Shunt; RTD/Compensators

resistor’s specification but not in the detail chip resistor’s specification is the 1.2 μs/50 μs “lighting pulse”, similar to the SPHVO and sometimes requested by the OEM. In this case, a 2 μF capacitor is charged and the discharge circuit contains, beside the tested resistor, two resistors of 37.5Ω

I'm trying to come up with a schematic for building a passive audio mixer for an aviation headset, but I'm having some questions about resistor values. Figuring out the general circuit is easy enough, but I'd like to bounce this off people who know a lot more than I do so I can make sure I'm doing this right.

NEWTRY ZX21 Decade Resistance Box Adjustable Lab Rotary Resistor Substitution Box Precision DC Variable Knob Switch 0 to 99.9999KR 0.25W ... Vortex Mixer Speed 0 ...